 |
|||||||||
 |
|
|
|
|
|
|
|
|
|
 |
|||||||||
 |
|||||||||
Engines Electrical Fuel
Brakes |
|||||||||
Engines |
|||||||||
F Head 134 Flywheel Bolts |
|||||||||
 |
|||||||||
Recent discovery of these bolts and nuts for F134 flywheel to crankshafts. Original equipment, these were two (2) per flywheel, while the other four (4) were tapered bolts that installed from the engine side of the crankshaft flange. For those of you who race the F head motor, use six (6) of the bolts to really secure the flywheel to the crank. Drilling required. |
|||||||||
Aluminum Valve Cove |
|||||||||
 |
|||||||||
Fits 1981 to 1990, 4.2 liter, 258 cubic inch, 6 cylinder motors originally equipped with a plastic valve cover. Drilling and tapping required. |
|||||||||
Motor Brackets Right and Left Motor Bracket - $35.00 each |
|||||||||
 |
|||||||||
These are the brackets necessary to put on AMC V8 into a 1976 through 1986 CJ chassis. Starting in the top left corner, going clockwise, they are left bracket to block, right bracket to block, right bracket to frame, left bracket to frame. If a 6 cylinder is coming out, use your existing left frame bracket. The 6 cyl and AMC V8 uses the same left bracket. The right frame bracket is one of our locally manufactured parts. |
|||||||||
 |
|||||||||
 |
|||||||||